How To Operate The Food Metal Detector Correctly?
2023-02-20Customization & Wholesale Metal Detector Machine Manufacturer Since 2010
Welcome to consult for quotation information !
Welcome to consult for quotation information !
1. The product to be inspected enters the active checkweigher from one end of the assembly line, and is quickly transported to the weighing section through the speed matching section;
2. During the movement of the tested product in the weighing section, the sensor of the weighing machine is deformed under the action of gravity, causing its impedance to change, and an analog signal is output,
which is output to the analog-to-digital converter of the weighing module through the enlarged circuit , and quickly convert it into a digital signal and transmit it to the processor of the weighing module.
3. The processor of the weighing module expands, processes and identifies the component signal. If the product component exceeds the preset upper and lower limit values, the processor will output a removal command to the removal device on the removal section, and then it will be unqualified. The product is removed from the removal section.
The food assembly line automatic weighing machine judges whether the product meets the standard weight of the production requirements according to the weight of the running product, and then sends a red light alarm to the unqualified product and automatically removes it. It is an automatic weighing equipment for the assembly line.
Hot Labels